|
|
| |
Why Use FLI Floor Trusses?
Our floor trusses are fabricated using brace elements that require no welding. The material costs for your floor project are less and installation of the floor trusses is easier. The floor trusses will give you the ability to route services conveniently and efficiently, as the trusses are designed to support cable trunking, plumbing services, etc. FLI trusses can be fitted to any steel frame, blockwork or temporary structure using a range of mounting plates and fixings. The floor trusses can be assembled quickly on-site.
Floor Trusses | 
Roof Trusses |
Floor Trusses - Technical Details
Other depths and section sizes of floor truss are available for all spans
 |
- Values in blue indicate ULS factored loads in
kN per linear metre in accordance with BS5950.
- For all floor trusses in the above table, deflections
are less than span/360 (Ref. BS5950).
- Table values are based on :-
a) Top (compression) chord of the floor truss being
provided with adequate lateral restraints at
spacing not greater than 1.8 metres.
b) The load is uniformly distributed along the
full horizontal span.
- Further options available.
|
For further details about our floor trusses and other products, please click here
|
|  |
|
