|
|
| |
Uni-Mast - Welded Sections For Guyed Solutions
Over One Million Feet Supplied Since Its Introduction... Our guyed masts in this product range are triangular light masts that are fully welded, with tube legs and bent solid bar braces. For special applications, each face can be supplied separately, ready for site assembly. This allows the sections to be packed flat, giving significant transport cost savings and, where required, easy manual portability to site. Structural performance is the same for both options.
These guyed masts are available in two widths, 0.4m & 0.5m. Each section is fitted with built-in climbing rungs in one face, removing the need for a separate ladder. The guy attachment frames are fixed between the sections at the required stay levels. Subject to appropriate loadings, they can be erected to a maximum height of 85m.
The FL Guyed Mast Series
These guyed masts are triangular or square in plan and are available in widths of 0.85m, 1m, 1.33m, 1.5m, 2.5m & 3m. The detail construction is similar to the tube tower range, each section consisting of a set of legs and bracing members bolted together. Special frames are inserted between sections as dictated by the assessment of the loading involved. Where twist tolerances demand, anti-twist stay frames are substituted for guy frames. Accessories can be supplied if required.
The WD25 Guyed Mast Series
Strong, slender structures with many applications, these guyed masts conform to a lightweight construction designed to carry UHF or VHF aerials at heights up to 33m. Alternatively, they may be used to carry long-wire aerials, or to function as a mast radiator at similar heights. They are triangular in plan, and are supplied in standard, fully welded sections with a face width of 250mm. Special guy support frames are inserted at intervals between sections.
For further details about our guyed masts and other products, please click here
|
|  |
|
