Versatower BP60 - Baseplate/post dimensions for a standard BP60 (13M20) Versatower

Original (precise) Imperial dimensions are as shown below - metric dimensions are approximate equivalents.  Galvanising means all measurements are +/- 1mm

baseplate1.jpg (199481 bytes)

 

 

 

 

_________________________________________________

  Baseplate  (1)  (square)    12mm thick   36” square (914 x 914mm)

   4 sleeved holes in baseplate - centres 30” (762mm) centre-to-centre. Sleeves are 1.5” (38mm) long, ID 27mm, OD 33mm.

_________________________________________________

   Post (1)  72” (1830mm) high     5.125” (130mm) square tubing (estimate 10mm wall thickness)

 

 

 

 

 

 

 

 

 

 

 

_________________________________________________

Webs (4)       Front (2)    each   860 x 745 x 455mm

                        Rear (2)     each    510 x 295 x 455mm

                        each 3/8” thickness

cimg1159.jpg (1059809 bytes)  baseplate + webs

_________________________________________________

Top plate  (1)     Rectangular     255 x 140mm x 3/8” thick + tube  *

cimg1163.jpg (1042599 bytes)   top plate + tube

_________________________________________________

Winch mounting bracket  (1)   front is 128 x 128mm      *

cimg1162.jpg (1048937 bytes)

_________________________________________________

Pulley mounting brackets (2 - one front, one rear)    *

_________________________________________________

Tilt rode (1)    *

cimg1166.jpg (1060999 bytes)   tilt-rode + 2 rear pulleys

_________________________________________________

  16th May 2008    * = more information required for manufacture - to follow a.s.a.p.